
Zoo Med Terra Effects Model 2 Nano LED Light with Sound Black, 1ea
by Zoo Med
Original price
$119.99
-
Original price
$119.99
Original price
$119.99
$119.99
-
$119.99
Current price
$119.99
ADDITIONAL FEATURES
- Product Gross Weight: 1.4000 lb
- Product Net Weight: 1.4000 lb
- Product Height: 3.50 in
- Product Length: 11.38 in
- Product Width: 7.25 in
INSTRUCTIONS
- Use Instructions: Check to make sure that the light fixture is unplugged before installing the fixture on the enclosure. Securely place the fixture on the frame of the tank using the included aluminum hangar. If desired, the hangar can be removed and the slot in the light housing can be used to suspend the light using suspension cable.1. Plug transformer into appropriate GFCI protected outlet, ensuring the controller unit and speaker are accessible.2. Press the POWER button (A) to power on your fixture.3. To view a particular mode or effect, press one of the eight buttons below:STATIC MODES (C)SUN: All lights on. (Sound — Flowing river)MOON: Blue light only. (Sound — Nighttime lake)FISH: White, blue, and UV only. (Sound — Lake waves)PLANT: All light on with additional red brightness. (Sound — Jungle stream)DYNAMIC EFFECTS (I)WAVES: Gentle waves crashing onto the shore.MOON and CLOUDS: Clouds passing in front of a full moon.CLOUDS: Overcast skies with cloud motion.STORM: Thunderstorm and lightning.4. To adjust the volume of the sound effects, press the volume up or volume down arrows. Press the center mute button to mute all sound (G). When muted, dynamic effects will change to a static weather spectrum with no additional light effects.5. To adjust the brightness of all colors simultaneously, press the brightness up or brightness down arrows (static modes only) (H).PROGRAMMING THE TIMER1. To set the current time, press and hold the clock button (K) until the unit flashes once. Enter the current time on the number pad (J) using 24-hour military time format. (Example: 8:30 AM should be input as 0830, and 8:30 PM should be input as 2030).a. Lights will flash once when the time has been successfully setb. Lights will flash three times if an invalid time has been selected or when there has been no operation for 10 seconds.2. Press and hold Sunrise button. Enter the desired daylight start time on the number pad using 24-hour military time. To set the time for the beginning of the night cycle, repeat this step by pressing and holding Sunset and entering the desired night cycle start time on the number pad.3. To adjust the daytime spectrum, press and hold the Daylight button. When the light flashes once, change the color spectrum as desired using the individual color control arrows (D). When satisfied, press SET (L). The unit will flash once when the setting is saved successfully. The fixture will switch to this spectrum automatically during daylight hours.a. To change the nighttime spectrum, repeat the step above, pressing and holding the Nightlight button prior to adjusting the nighttime spectrum to your liking. Press SET (L) to save your new night setting.4. Press the Auto button (B) to enter back into the timer mode anytime during operation. The spectrum will automatically adjust to the appropriate day or night spectrum based on the current time that you have set.
SAFETY
- Caution: Keep children and pets (other than your aquarium inhabitants) away from fixture
- Safety Warnings: Caution must be taken when using electrical appliances near water. To reduce the risk of electric shock, be sure that the lamp fixture is unplugged during any of the following situations:1. Unplug when installing the light fixture on or over your aquarium.2. Unplug if the light fixture comes into direct contact with or if any part of the light fixture becomes wet (other than drops of water on the outside of the clear splash guard).3. Unplug when performing aquarium maintenance.4. Unplug before placing your hand(s) in the water of the aquarium. Be sure that your hands are completely dry before plugging the light fixture into an appropriate electrical outlet.5. Unplug when not in use.6. When unplugging the lamp fixture, grasp the plug to prevent damage to the power cord. Never pull on the power cord to unplug the lamp fixture.7. DO NOT exceed electrical rating. Lamps must be of the correct wattage as noted on the product packaging.8. DO NOT splice, repair, or modify the power cord. Inspect the power cord periodically for damage.9. For indoor use only.10. DO NOT alter or modify this product. Contact an electrician if you are unsure about the electrical connection.
WARRANTY
- Warranty Description: 1 Year Warranty
SPECIFICATIONS
- Compatible With: TerraEffects Nano LED; Wireless Remote
- Lumens: 335 Lumens
- Wattage: 8 Watts