Zoo Med ReptiBreeze LED Deluxe Screen Cage Black, 1ea/XL

• Use Instructions: 1. Attach top panel to back panel: Place the Back panel on its long edge. Locate the edges labeled C on both the Back and Top panels. Attach the Top panel to the Back panel using two long screws.2. Attach bottom panel to back panel: Align the letters K on the Bottom and Back panels. Screw the panels together using long screws.3. Attach the right side panel: Match letters D, F, and J on the Right Side panel to the corresponding letters on the Top, Back and Bottom panels. Use long screws to attach panels together.4. Insert lower door: hinge pin and attach left side panel: Turn the assembly over so that it is resting on the Right Side panel. Locate the hole for the Bottom Door hinge pin on the inside edge of the Right Side panel. Align the I label on the Bottom Door with the corresponding label on the Bottom panel (the sticker must face out). Insert the right Bottom Door hinge pin into the hole on the Right Side panel. While holding the Bottom Door in place, set the Left Side panel on the assembly, making sure that the left Bottom Door hinge pin goes into the hole in the inside edge of the Left Side panel. Attach the Left Side panel using long screws. Shut the Bottom Door and rotate latches on either side to lock.5. Attach upper main door: Turn the assembly onto the back panel and set the Upper Main Door in place by matching the labels. Use the four short screws to attach the hinges to the Right Side panel.6. Insert floor panel: At this time, you may remove the Panel Identification Labels. Place the terrarium upright and insert the Floor Panel through the Upper Main Door.7. Insert tray. Shut the Upper Main Door and lock it by rotating the latches, making sure that the latch pegs on the door fit into the recesses in the latches.8. Connect the LED power supply to the top panel.9. Plug into a GFCI (Ground Fault Circuit Interrupter) outlet. Your Reptibreeze is assembled and now ready to use.

WARRANTY